v-tail

MSDS


Section 1: Product and Company Identification [ Return to Top ]

Product Label Name: Ventrac Premium Full Synthetic Engine Oil 10W-30

VENTRAC Product Code: 15.0037-1 (quart), 15.0037-CS (case of quarts), 15.0037-55 (drum)

Product Use: Lubricating oil. Not to be misted.

Supplier/Manufacturer:
Venture Products Inc.
328 E. Water St.
Orrville, Ohio 44667

In Case of Emergency:
CHEMTREC, U.S. : 1-800-424-9300
INTERNATIONAL +703-527-3887

Section 2: Hazards Identification [ Return to Top ]

EMERGENCY OVERVIEW

Color: Brown [Dark]

Physical State: Liquid

Odor: Mild Hydrocarbon

Hazard Statements: Not expected to produce significant adverse health effects when the recommended instructions for use are followed.

Precautions: No known significant effects or critical hazards. Avoid prolonged contact with eyes, skin and clothing.

OSHA/HCS status: While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the safe handling and proper use of the product. This MSDS should be retained and available for employees and other users of this product.

Routes of Entry Dermal contact. Eye contact. Inhalation. Ingestion.


POTENTIAL ACUTE HEALTH EFFECTS

Inhalation: No known significant effects or critical hazards.

Ingestion: No known significant effects or critical hazards.

Skin: No known significant effects or critical hazards.

Eyes: No known significant effects or critical hazards.


POTENTIAL CHRONIC HEALTH EFFECTS

Chronic Effects: No known significant effects or critical hazards.

Carcinogenicity: No known significant effects or critical hazards.

Mutagenicity: No known significant effects or critical hazards.

Teratogenicity: No known significant effects or critical hazards.

Developmental Effects: No known significant effects or critical hazards.

Fertility Effects: No known significant effects or critical hazards.


OVER-EXPOSURE SIGNS/SYMPTOMS

Inhalation: No specific data.

Ingestion: No specific data.

Skin: No specific data.

Eyes: None Known.

Section 3:Composition/Information on Ingredients [ Return to Top ]

There are no ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Section 4: First Aid Measures [ Return to Top ]

Eye: Immediately flush eyes with plenty of water for at least 20 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if symptoms occur.

Skin: After contact with skin, wash immediately with plenty of soap and water. Get medical attention if symptoms occur.

Inhalation: Move exposed person to fresh air. Get medical attention if symptoms occur.

Ingestion: Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.

Notes to Physician No specific treatment. Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Section 5: Fire Fighting Measures [ Return to Top ]

Flammability of the Product: No specific fire or explosion hazard.


EXTINGUISHING MEDIA:

Suitable: Use an extinguishing agent suitable for the surrounding fire.

Not Suitable: None Known.

Hazardous Decomposition Products: No specific data.

Special Protective Equipment for Fire-Fighters: No special protection required.

Section 6: Accidental Release Measures [ Return to Top ]

Personal Precautions: Put on appropriate personal protective equipment (see Section 8).

Environmental Precautions: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).


METHODS FOR CLEANING UP

Small Spill: Absorb with an inert dry material and place in an appropriate waste disposal container. Dispose via a licensed waste disposal contractor.

Large Spill Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose via a licensed waste disposal contractor. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.

Section 7: Handling and Storage [ Return to Top ]

Handling: Put on appropriate personal protective equipment ("see Section 8). Avoid contact with used product. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hand and face before eating, drinking and smoking. Do not reuse container.

Storage: Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Section 8: Exposure Controls/Personal Protection [ Return to Top ]

Under conditions which may generate mists, the following exposure limits are recommended: ACGIH TLV TWA: 5 mg/m³; STEL: 10 mg/m³.

Consult local authorities for acceptable exposure limits.

Recommended Monitoring Procedures: Personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment.

Engineering Measures: No special ventilation requirements. Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Hygiene Measures: Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period.

Respiratory: Not required under normal conditions of use. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Hands: Not required under normal conditions of use. Use gloves appropriate for work or task being performed.

Eyes: Not required under normal conditions of use. Safety eyewear should be used when there is a likelihood of exposure. Recommended: Safety glasses with side shields.

Skin: No special protective clothing is required.

Environmental Exposure Controls: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

Section 9: Physical and Chemical Properties [ Return to Top ]

Physical State Liquid
Color Brown [Dark]
Flash Point Open Cup: 220°C(426°F)
Flammable Limits Not Available
Boiling Point Not Available
Relative Density 0.8571
Volatility Not Available
Viscosity Kinematic: 0.12 cm2/s (12 cSt) (100°C (212°
F))
Kinematic: 0.806 cm2/s (80.6 cSt) (40°C)
Odor Mild Hydrocarbon
pH Not Available
Auto-Ignition Temperature Not Available
Melting Point/ Pour Point -38°C (-36.4°F)
Vapor Pressure Not Available
Vapor Density Not Available
Evaporation Rate Not Available
Solubility Not Available

Section 10: Stability and Reactivity [ Return to Top ]

Chemical Stability: The product is stable.

Conditions to Avoid: No specific data.

Materials to avoid: Reactive or incompatible with the following materials: oxidizing materials.

Hazardous Decomposition Products: Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Possibility of Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.

Hazardous Polymerization: Under normal conditions of storage and use, hazardous polymerization will not occur.

Section 11: Toxicological Information [ Return to Top ]


ACUTE TOXICITY

There is no data available.


CHRONIC TOXICITY

There is no data available.


IRRITATION/CORROSION

Skin: There is no data available.

Eyes: There is no data available.

Respiratory: There is no data available.


CARCINOGENICITY

There is no data available.


MUTAGENICITY

There is no data available.


TERATOGENICITY

There is no data available.


REPRODUCTIVE TOXICITY

There is no data available.

Section 12: Ecological Information [ Return to Top ]

Ecotoxicity: No known significant effects or critical hazards.

AQUATIC ECOTOXICITY

There is no data available.


PERSISTENCE/DEGRADABILITY

There is no data available.

Section 13: Disposal Considerations [ Return to Top ]

Waste Disposal: The generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Empty containers or liners may retain some product residues. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

Disposal should be in accordance with applicable regional, national and local laws and regulations.


Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION for additional handling information and protection of employees.

Section 14: Transport Information [ Return to Top ]

DOT/TDG/IMDG/IATA: Not regulated.

Section 15: Regulatory Information [ Return to Top ]

UNITED STATES

HCS Classification: Not regulated.

U.S. Federal Regulations:

  • United States inventory (TSCA 8b): Not determined.

  • SARA 302/304/311/312 extremely hazardous substances: No products were found.

  • SARA 302/304 emergency planning and notification: No products were found.

  • SARA 302/304/311/312 hazardous chemicals: No products were found.

  • SARA 311/312 MSDS distribution - chemical inventory - hazard identification: No products were found.

  • Clean Water Act (CWA) 307: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts; Benzene; Arsenic; Cadmium; Lead; Toluene.

  • Clean Water Act (CWA) 311: Benzene; Toluene.

Clean Air Act Section 112 (b) Hazardous Air Pollutants (HAPs): Not listed

Clean Air Act Section 602 Class I Substances: Not listed

Clean Air Act Section 602 Class II Substances: Not listed

DEA List I Chemicals (Precursor Chemicals): Not listed

DEA List II Chemicals (Essential Chemicals): Not listed


STATE REGULATIONS

Massachusetts: None of the components are listed.

New York: None of the components are listed.

New Jersey: The following components are listed: Distillates (petroleum), hydrotreated heavy paraffinic; Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts

Pennslyvania: The following components are listed: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts


CALIFORNIA PROP. 65

WARNING: This product contains less than 0.1% of a chemical known to the State of California to cause cancer.

WARNING: This product contains less than 1% of a chemical known to the State of California to cause birth defects or other reproductive harm.

Ingredient Name Toluene Benzene Arsenic Cadium Lead
Cancer No Yes Yes Yes Yes
Reproductive Yes Yes No Yes Yes
No Significant Risk Level No 6.4 μg/day (ingestion)
13 μg/day (inhalation)
0.06 μg/day (inhalation) 0.05 μg/day (inhalation) 0.05 μg/day (inhalation)
Maximum Acceptable Dosage Level 7000 μg/day (ingestion)
13000 μg/day (inhalation)
24 μg/day (ingestion)
49 μg/day (inhalation)
No 4.1 μg/day (ingestion) Yes

CANADA

WHMIS (Canada): Not Controlled under WHMIS (Canada).
Canadian Lists

Canadian NPRI: The following components are listed: Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts.

CEPA Toxic Substances: None of the components are listed.

Canada Inventory: Not Determined.

This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the

Section 16: Other Information [ Return to Top ]

United States Label Requirements: Not expected to produce significant adverse health effects when the recommended instructions for use are followed.


Hazardous Material Information System (U.S.A.):

Health 0
Flammability 1
Physical Hazards 0

Caution:

HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.

The customer is responsible for determining the PPE code for this material.

National Fire Protection Association (U.S.A.):

Date of Issue: 08/15/2013

Date of Previous Issue: 05/15/2012

Version: 2

Notice to Reader

To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

© Ventrac by Venture Products, Inc. 2014. Venture Products Inc. reserves the right to make changes in design or specifications without incurring obligation to make like changes on previously manufactured products. Legal Notices